Signs It’s Time to Replace Your Chef’s Knife - Choppn' Knives

sign's it's time to replace your chef knife



If you take good care of your kitchen knives, they will repay the favor. However, there comes a certain point, when sharpening just won’t do. While a high quality and professional kitchen knife can have the potential to last a lifetime, the reality is that, in a working chefs environment, your knife will be put to the test and time will make a difference. Yes, a dull edge can be sharpened, and small imperfections can be removed, but there are certain instances where your knife should simply be retired. So, when exactly is it time to replace your knives?


The blade on your knife will, without a doubt, get some grooves and small marks – this is all just part of wear and tear in the kitchen. The tiny chips or missing parts in your knives cutting edge are referred to as micro-corrosion. It is often caused by moisture left in the area – this can be any kind of wetness left on the blade from food, so be sure to try and dry your knife after use or washing.Small imperfections may be able to be smoothed out by a professional, but if a blade gets any large chips in, it may not be fixable and you will have to replace the knife.


Many stainless steel knives can develop rust, which is usually because of soaking your knives for too long. The stainless element is chromium coated, which if soaked often enough can begin to deteriorate. Once this coating has been compromised, the knife is at further risk of rust development. Extreme heat, excess moisture and salt water can all be causes of rust, as well as improper drying.A small amount of rust can be removed, but once a knife is rusted in a particular spot, it is incurable. A cut by any rusty blade is not as clean as necessary for food preparation and can add impurities. If you aren’t confident in using the knife due to the amount of rust, it is advised to replace.

Bent/Broken Tip

If you drop your knife, it hits a floor/hard surface tip or you use the front part of the blade to cut something hard, then you can bend or even break the tip. Accidents happen in the kitchen and any chef is bound to experience kitchen nightmares, but even something as simple as cutting into a watermelon can bend or break a tip. This is even more reason to invest in high quality and professional knives.A professional repairman may be able to attempt to reshape your blade, but if a considerable amount is missing from the blade, you should consider replacing.

Loose Rivets/Handle

The rivets on your knife are the small metal rounds that secure the tang into the handle. When these come loose, it can alter the stability and balance of your blade, making it less effective and even dangerous. These can be secured by a professional and can often be easy to tighten, but if they are corroded in any way or misshapen, this won’t be possible. Your best fix for this situation is to consider replacing.There are various reasons why the handle may have broken off from the knife, however, the most likely reason is because of moisture or old age. The safest option is to replace and invest in a high-quality, strong-structured knife.

Comfort Is Key

Any chef should feel comfortable using their kitchen knives, so if your knife has come to feel too heavy, unbalanced, too large, too small, or does not have the grip you want, it may be best to consider donating it elsewhere and replacing it with one that fits you, your style and comfort preferences. Over time, our cutting technique and knife handling expertise may change which results in a knife feeling less comfortable than what it used to be.

Old Age

It is often the case that the more you use a specific knife, the more attention and care it will need. When you sharpen your blade you will be inevitably removing small amounts from the surface. After a while, it may seem like your knife requires more frequent sharpening. There are a few things you can do to prolong your knives life, but at some point, the wear and tear of your knife combined with the age may call for new tools. Only you will know when it’s time for a new knife!

Dull Knife – Replace or Sharpen?

A dull knife can be dangerous, time-consuming, difficult to use, and extremely frustrating, whereas a sharp and well-honed knife will glide through your food, making your job much easier.If your knife’s blade has gone dull or isn’t straight, don’t automatically think you need to throw it out. Almost any blade can be sharpened, but you just need the right tools and the right know-how. 

Many professional chefs will treat their blades with a sharpening steel before every use, but believe it or not, these tools are not actually doing the sharpening. They are actually realigning the blade. While the difference between sharpening and honing is only subtle but it can make a much more obvious difference and determine the cut and efficiently of a blade. 

When your knife gets dull, the sharp edge will have been lost or the blade’s edge is no longer aligned. The blade may still be sharp, but when you lose even the slightest bit of alignment, you won’t be able to cut through food as efficiently.


Honing steel pushes the edge of the knife back to the center and straightens it out. It will correct the edge without shaving off much, if any, of the blade. While honing doesn’t technically sharpen your knife, if it’s done properly, your knife will seem sharper because the blade is in the right position. Honing should be done often, with some chefs even honing before each use.Honing rods catch the miniature hooks and smooth them back into the original shape. By using honing rods before use, you can keep your knife sharp few numerous months at a time.


In comparison to honing, when you sharpen your knives, you will see ground shards of the blade. This is done to produce a new and sharper edge. This can be done using a water stone, whetstone, or electric knife sharpener (although we never suggest using an electric sharpener as they are too aggressive). Sharpening can be done much less frequently than honing, in fact, just a few times a year, dependent on how much the knife is used.

The metal at the end of your knife blade is similar to a pipe cleaner. It is bendable, thin and can easily take new shapes. When you press down on a blade onto a solid surface, the edge will bend – this may only be at a microscopic level, but over time it impacts the use, shape and sharpness.

Ways You May Be Ruining Your Knives


Compared to steel, ceramic or stone, plastic and wooden chopping boards are less likely to dull your knives and kinder to the blade. Striking your knife on a hard surface can dull the blade.


‘Cutting corners’ and reaching for the nearest knife won’t help the condition of your blade. For example, cutting through joints or bones should be done with a cleaver or boning knife, not a chef’s knife. This can be dangerous, damage the food and your knife.


Soaking your knife is an invitation for rust. Be sure to wash and dry thoroughly and quickly. Avoid washing your knives with other cutlery also. Knives knocking against other items guarantees dull and damaged edges. Avoid leaving your knife out to dry on a draining board – this runs the risk of rust and being knocked against other utensils.


High heat and humidity is not a good combination for the care of your kitchen knives. Knives with wooden handles are particularly vulnerable in dishwashers as it can force the handles loose over time.


The storage of your knives is vital. Storing sharp knives in a drawer can mean blades knock and damage is caused. A sheath, magnetic knife rack or knife block is better.


Not honing regularly enough means your blade will quickly become dull. Honing with a diamond honer smooths out any nicks and helps repair the metal.


Sharpening too much could mean your blade wears down sooner and can cause the edge to wear down into the thicker part of the blade, meaning the knife edge will become thicker and duller.

Throwing Away A Kitchen Knife

High-quality kitchen knives are a true investment if you are a professional in the industry, but when it comes to throwing any away, you can’t simply add it to the food waste bin. When your knife has run its course, it is extremely dangerous to just throw it in the bin, even if it is wrapped up well. Even dull blades can cause cuts, so, what do you do?


Choppn' Knives have been built with longevity in mind. Using premium materials such as Japanese VG10 for our core metal, Damasacus Steel, and a stabilized wood handle, we have perfected the anatomy of a truly perfect Chef Knife. To provide the best cutting experience, we finish all knives by hand using the a traditional Japanese method - The Honbazuke Method. This method ensure edge retention and a sharp cutting edge that stays sharp!

Get rid of your blunt chef knife and find out why over 4.000+ professional chefs and home cooks have switched to Choppn' Knives


We are committed! 

not only to bringing you the most Unique Chef Knives, but also the best available information about their use and maintenance

Leave a comment

Please note, comments need to be approved before they are published.